A unit featuring all power driven aids for the user
Simplicity and Rapidity
Accuracy and safety
Technical Specifications:
Wheel diameter:
1,560 mm
Wheel width:
590 mm (22 inches)
Rotation speed: Slow:
7 rpm, Fast: 13 rpm.
Wheel lift capacity:
75 kg.
Operating hydraulic pressure:
1.200 kg for the side bead breaking rollers.
Pneumatic pressure in the circuit:
800-1,200 kPa.
Reduction gear:
1.5 kW-2Kw.
Net weight:
495 kg.
Fully automatic “racing” tire changer
Same characteristics as UTM.400S with two position column and bead breaker blade with 2 opening alternatives for the lifting of wheels up to 16” in width
UTM.450SGT: Same with tubeless inflation device
Technical Specifications:
Electric motor:
3 to 12"
Wheel width:
1,2-1,7 HP 1-2vel
Maximum wheel diameter:
1070 mm
Rim diameter:
10 to 23"
Operating hydraulic pressure:
200 kg for the side bead breaking rollers.
Bead breaker force:
2500kg
Power supply:
230/400 V Three-phase
Air supply:
8 to 12 bars
Net weight:
204 kg
Overall size:
760 x 1200 x 1830
UTM.LPST3-2004
Addition of the UTM.LPTS3 and the UTM.LPTS-ALU is the ultimate solution for removing and fitting. The rim could be locked in high horizontal position, in way to press the lower bead outside the rim channel: the pressure on the upper bead decrease to avoid the damage of the alloy rims and the tires
Pneumatic locking system is strong enough for better efficiency and security
The metallic frame is a heavy duty design for a long life in the workshop
Automatic tire changer
Technical Specifications:
Wheel width:
3 to 12"
Maximum wheel diameter:
1.000 mm
Rim clamping diameter (interior clamping):
12 to 23"
Rim clamping diameter (exterior clamping):
12 to 20"
Bead breaker force:
2.500kg
Power supply:
400 V Three-phase
Air supply:
8 to 12 bars
Weight:
204 kg
Overall size:
760 x 1.200 x 1.830
General Specifications:
Large-section column with powered backward tilting
Pneumatic arm-locking with automatic, horizontal and vertical tyre head away
motion
Large-diameter turntable to clamp up to 24’’ diameter from the inside and up to
22’’ from the outside
Equipped with regulation/lubrication fi lter, infl ating gun with pressure limiter up
to the standards as well as claw and head protection caps for alloy wheels
Compatibility with the pneumatic helper arm UTM.LPTS3
